VRC801D2 VELLEMAN
- 2 -
3. Device Setup
a. Device Code Assignment
Key on the Remote Device Initial Code Total of
Codes
TV Television set 048 488
VCR Video recorder 075 182
DVB Satellite cable DVB 075 403
DVD DVD or digital video recorder 026 190
TUNER Radio 039 114
TAPE Tape receiver 067 134
CD CD player 035 124
AUX Amplifier, LD or video CD 032 204
b. Direct Setup by Brand and Code
• Turn on the device (e.g. television set) you
would like to operate (insert a videotape if
it’s a VCR).
• Hold the SET key pressed on the
VRC801D2 and press the device key (in this
example: TV).
• Release both buttons. A random brand will
be displayed on the LCD. Select the correct brand by using the
or the button.
• Point the remote at the device and check the functions of the keys. If none or most of the keys work, select another code
using the
or the button.
• Press OK to confirm. SUCCES will be displayed on the LCD.
Remark: - Exit the codes by pressing the EXIT or the device key (in this example: TV).
- If the device is locked, unlock it before setup (see “5.c. Locking the Device”).
c. Setup by Auto Search
You may use the auto-search function to find the correct
code of the device.
• Turn on the device (e.g. DVD player) you would like to
operate (insert a videotape if it’s a VCR).
• Hold the SET key pressed for 3 seconds. CODE SETUP
appears on the LCD. Press OK to confirm.
• DEV SEARCH appears on the LCD. Press OK and select
the device using one of the device keys. Point the
VRC801D2 at the device and press OK. The auto-search
function starts.
• If the device reacts press a key to stop the auto-search function. You can also select a code using the
or the button.
Point the remote at the device and check the functions of the keys. If none or most of the keys work, repeat the steps above.
• Press OK to confirm the code. SUCCESS will be displayed on the LCD. Now you can exit the auto-search function by
pressing the EXIT button twice or auto-search the code for another device by pressing the corresponding device key and
repeating the steps above.
Remark: - When the remote has searched through all the codes, it will stop at the first code.
- If the device is locked, unlock it before setup (see “5.c. Locking the Device”).
d. Setup by Entering a Code
• Turn on the device (e.g. television set) you would like to
operate (insert a videotape if it’s a VCR).
• Consult the code table at the back of this manual and find
the code corresponding to the brand of the device (in this
example: Lifetec: 003, 010, 062).
• Hold the SET key pressed for 3 seconds. CODE SETUP
appears on the LCD. Press OK to confirm.
• DEV SEARCH appears on the LCD. Select DEV SETUP
using the
or the button and press OK.
• Press the device key corresponding to the device you want to operate (in this example: TV) and press OK. Enter the 3-digit
code (in this example: 003 for Lifetec) and press OK to save.
• The LCD will display SUCCESS. Press EXIT twice to exit the setup mode.
• Point the remote at the device and check the functions of the keys. If none or most of the keys work, repeat the steps above
and try another code (in this example: 010 or 062).
