Connecting the Cables
CONNECTING A REVOLABS SINGLE CHANNEL SYSTEM TO POLYCOM VSX8000E VIDEO CODEC
1. Connect a Revolabs 2.5mm to RCA audio cable between the 2.5mm analog
output on the Single Channel System and the red “LINE INPUT” Phoenix
connector on the VSX8000e.
Configuring the VSX8000e Video Codec
CONFIGURING THE AUDIO MENUS OF THE VSX8000E VIDEO CODEC
1. Select SYSTEM
2. Select ADMIN SETTINGS
3. Select AUDIO
4. Set INPUT TYPE to LINE INPUT
5. ENABLE Echo Canceller
6. DISABLE Polycom microphones by removing checkmark on ENABLE
POLYCOM MICROPHONES
