Connecting the Cables
CONNECTING A REVOLABS SINGLE CHANNEL SYSTEM TO POLYCOM VSX7000S VIDEO CODEC
1. Connect a Revolabs 2.5mm to RCA audio cable between the 2.5mm analog
output on the Single Channel System and the red “LINE INPUT” port on the
VSX7000s.
Configuring the VSX7000s Video Codec
CONFIGURING THE AUDIO MENUS OF THE VSX7000S VIDEO CODEC
1. Select SYSTEM
2. Select ADMIN SETTINGS
3. Select AUDIO
4. Set Red LINE INPUT to AUDIO MIXER
5. ENABLE Echo Canceller
6. DISABLE Polycom microphones by removing checkmark on ENABLE POLYCOM
MICROPHONES
