Technical Specifications
ADSL2+ Single Port Modem
Dimensions
■ W (5.03in) x D(4.33in) x H(1.18in)
Weight
■ 0.33lbs
Power
■ Input 100 VAC, 50Hz
■ Input 110 VAC, 60Hz
■ Input 240 VAC, 50/60Hz
■ Output 5VDC 1A
Interfaces
■ DSL Line: RJ11
■ Ethernet: 1 Port 10/100BaseT, Auto MDI/MDIX
■ On/Off Power Switch
Standards Support
■ ATM Support
- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back
- Support for 8 PVC's
- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)
■ Routing/Bridge Support
- Transparent Bridge Support
- DHCP Server/Relay/Client
- DNS Relay Agent
- Dynamic DNS Support
- DMZ support
- Static Routing
- RIPv1 and RIPv2
- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)
■ PPP Support
- PAP/CHAP authentication
- PPPoA
- PPPoE
■ Security
- NAT for Basic Firewall support
- Ingress and Egress Packet Filtering
- Parental Control
- MAC Filtering
- Stateful Packet Inspection
Protocol Support
■ ANSI T1.413 (Full Rate ADSL)
■ ITU G.992.1 (DMT)
■ ITU G.992.2 (G.lite)
■ ITU G.992.3 (ADSL2)
■ ITU G.992.5 (ADSL2+)
■ ITU G.994.1 (G.hs)
■ Annex L
■ Annex M
Management
■ Web-based Configuration GUI
■ CLI
■ Telnet Remote Management
■ FTP/TFTP firmware upgrade and configuration
backup/restore
■ Syslog Support
Regulatory Compliance
■ FCC Part 15, Part 68
■ CE
■ UL
■ TUV
■ RoHS compliant
Operating Requirements
■ Operating Temperature: 32F to 104F (0C to
40C)
■ Storage Temperature: -4F to 149F (-20C to 65C)
■ Humidity: 5% to 95%, non-condensing
Ordering Information
1611-A2-200 ADSL2+ CPE Router, 10/100BaseT, N.A.
1611-A2-302 ADSL2+ CPE Router, 10/100BaseT, EURO
2008/06/11 08:21:50
