• Remove the power supply cable and the draining
hose from the hose holders (C) on the rear of the
appliance.
• Unscrew the three bolts (A) and remove the hose
holders (C).
• Slide out the relevant plastic spacers (B).
Warning! Do not
remove the drain
hose from the rear sup-
port. Remove this hose
only if it is necessary to
drain the water. Refer
to "Frost precaution"
and "What to do if".
• Plug the smaller upper hole and the two large
ones with the corresponding plastic plug caps.
Positioning and levelling
x 4
7
