23
EN
12. ADJUST YOUR WATER HARDNESS
SETTINGS.
The water hardness of your washing machine by
default is set to SOFT. If your local water hardness
is medium or hard, you must adapt the water
hardness of the washing machine as described
below.
13. Turn on the machine by rotating
the knob on any programme
14. Press and hold
“Dosing Aid“ and “+”
buttons simultaneously
for a few seconds.
A horizontal bar appears
on the display. This is
the symbol for SOFT water
hardness level.
10. Shake o the excess
water immediately.
The test strip contains 4 green squares which will
turn to red depending on the hardness of your
water:
11. Wait 1 minute to see the result.
1 red square >> Soft
3 red squares >> Hard
2 red squares >> Medium
4 red squares >> Hard
+
Soft
15. Press the buttons marked with “+“ or “-” to
eventually adjust the water hardness to “medium“
or “hard“.
Medium
Hard
-
+
16. Press “Ok” to conrm
and save.
Ok
