15
EN
END
HOW TO USE THE WASHING MACHINE
1. Open the door and load the
laundry. Load the articles one
at a time loosely into the drum.
Observe the load sizes given in the
programme chart.
Note: overloading the machine will result in
unsatisfactory washing results and creased laundry.
2. Close the door. Take care that no
laundry gets stuck between door and
door seal.
3. Open the water tap.
7. If you want, you can now select additional
options among those which are selectable for your
programme.
8. If you do not use the Dosing Aid, add
detergent now.
If you want to use the Dosing Aid, read the
relevant paragraph.
4. Select a programme by
turning the knob up to the desired
programme. The selected programme
is highlighted in the list of the available
programmes.
10. When the programme is nished,
the display indicates END, and the door
open indicator lights up.
9. You can now start your washing cycle
by pressing the Start/Pause button.
Start
(Pause)
5. If you want to change the default
values temperature, press the temperature
button to select the desired temperature.
6. If you want to change the default spin
speed, or activate the rinse hold, press the
spin button.
11. You can now turn o the
appliance by turning the programme
selector to the “0” (O) position.
If you do not switch o the
washing machine, it will switch o
automatically after about a quarter of
an hour, to save energy.
12. Unload and leave the door
and the detergent dispenser ajar to
allow them to dry.
