GB 8
Water supply hose(s) (picture A, B or C - depending on
model)
Check regularly for brittleness and cracks. If a supply hose shows a
damage, replace it by a new hose of the same type, available through
our After-Sales Service or your specialist dealer.
If the inlet hose of your washing machine corresponds with the
model on picture “
B
”, periodically check the safety valve inspection
window: if it is red, the hose's waterstop function was triggered, and
the hose must be exchanged by a new one from our After-Sales
Service or your specialist dealer.
If your supply hose has a transparent hose coating (fig. “
C
”),
periodically check the colour. If the hose colour intensifies locally,
this is an indication that the hose may have a leak and should be
replaced. Contact our After-Sales Service team or specialist dealer
to obtain a replacement hose.
Cleaning the mesh filter in the water supply hose(s)
1.
Close the tap and loosen the inlet hose on the tap.
2.
Clean the internal mesh filter and screw the water inlet hose back
onto the tap.
3.
Now unscrew the inlet hose on the rear of the washing machine.
4.
Pull off the mesh filter from the washing machine connection
with universal pliers and clean it.
5.
Refit the mesh filter and screw the inlet hose on again.
6.
Turn on the tap and ensure that the connections are completely
water-tight.
A
B
Safety valve
inspection
window
60105200GB.fm Page 8 Tuesday, April 13, 2010 3:52 PM
Black process 45.0° 130.0 LPI
