DRAINING RESIDUAL WATER
Draining Residual Water
Residual water should be removed:
•
before moving a washing machine (relocation),
•
when installing in areas prone to frost and
•
before removing the filter.
1.
Before emptying the residual water, switch the
appliance off and unplug it from the mains socket. Make
sure that the water has cooled before draining.
2.
Turn the slot through 180° by means of a coin, so that
the dot points to the open lock. The cover bends down
to the floor.
3.
Remove the hose, place a low container underneath and
pull the cap from the hose.
4.
Drain the residual water until no more flows out. Then
close the residual water emptying hose.
5.
Put the hose in the cover, fold the cover up and close the
cover using a coin. The dot points to the closed lock.
6.
Pour about 1 l of water into the detergent dispenser to
reactivate the ecosystem. You must also plug the mains
plug back into the socket-outlet.
7.
Now you can fill the washing machine and run the
desired programme.
2/5
3
5
