
GB
Quick Reference Guide
Before using the machine, please also read the Instructions For Use carefully!
5
AZB 8574
5019 307 01560
(Subject to technical modifications)
Indicator lamps
th
sense
40’
20’
30’
60’
3h 6h 9h
Prêt à porter
Prêt à repasser
Fraîcheur
Prêt à repasser
Prêt à porter
Prêt à ranger
Prêt à ranger
Séchage renforcé
Nettoyer ltreVider réservoir
Séchage Fin de cycle
Arrêt
Fabriqué en France
AZB 8574
Mix
Fibres sensibles
Départ
(Pause)
Délicat
Départ
diéré
Séchage+
Programme selector knob
The drying programme is selected by
turning this knob. The “Start (Pause)”
indicator lamp flashes.
“Start (Pause)” button
The drying programme is started by
pressing this button. The indicator lamp
lights up.
Clean filter
The indicator lamp lights up when the
filter and/or the heat exchanger and its
housing need to be cleaned.
Clean the filter at the end of every
drying cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted. Empty the container and
restart the drying programme.
Empty the water container after
every drying cycle.
End of cycle
The drying programme is finished. Please
unload the dryer.
Overdry protection / 6
th
Sense
The indicator lights up when a humidity
controlled programme is selected, to
indicate the activated protection function.
Gentle
Selecting this option will reduce the
drying temperature. This option cannot
be selected when the “Rapid” option is
selected (if available).
Départ
(Pause)
th
sense
Délicat
Dry+
By selecting this option you can increase the
dryness level of the laundry.
Start delay
Delays the start of the drying cycle by 3, 6
or 9 hours.
Each time the button is pressed the delay
is increased by 3 hours.
Press the “Start (Pause)” button to
confirm the final selection and to start the
dryer.
The lamps above the programme selector
knob are flashing to indicate the selected
time.
During the countdown, the drum will
turn from time to time to redistribute the
laundry and the pump will start to pump
water in the water container.
To cancel or change the previously set
time delay, set the index of the
programme selector knob to “off”
position, or open the door.
Séchage+
Départ
diéré
3h 6h 9h