22
TRANSIT BOLTS
The appliance is fitted with transit bolts to prevent
internal damage while it is being moved.
Before using the appliance the transit bolts
MUST be removed (Fig. 1).
1.
Slacken the bolts with the spanner supplied
(Fig. 2).
2.
Move the bolt to the centre of the hole
(Fig. 3).
3.
Completely extract the bolt and the coloured
plastic spacer (Fig. 4).
4.
Plug the hole using the plastic cap provided
(Fig. 5).
5.
Repeat the above operations for the other
3 bolts.
Note
Fit the transit bolts before transporting the
appliance as follows:
1.
Pry up the plastic caps with a screwdriver,
slide them out against the direction indicated
with the arrow and remove them.
2.
Fit the transit bolts by following the above
procedure in reverse order.
INSTALLATION INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3
