7
1-1/2” Mini Jets
These look identical to the ozone jet, and your hot tub may be equipped with several of these jets. A forceful, steady stream of
water/air is delivered from these jets when the pump is on high speed.
Interchangeable Jet Faces
The jet faces of the various styles of 5” jets and 3” jets can be easily interchanged with others of the same size. This allow you to
customize your hot tub massage therapy. Each style of jet varies in intensity or sensation. To remove the jet face to relocate it,
simply turn the outer ring counterclockwise past the stop point. This disengages the jet, then gently pull on the outside ring of the
jet. The jet insert will pull away from the hot tub. Follow the same procedure with another jet. To reinstall, simply push the jet insert
back into the jet cavity until it stops, then rotate the jet clockwise until it snaps into place. Water flow through these jets can be
controlled by turning the outside face of the jet. Turning the trim ring clockwise will reduce the water flow from the jet and turning it
counterclockwise will increase the water flow.
Hot Tub Light
Red and blue colored light lenses are included with your hot tub.
To install or remove lenses simply push them on or pull them off
from the light on the inside of the hot tub.
To replace the hot tub light bulb, turn off all power to the hot tub. Locate
the rear of the hot tub light assembly and unscrew the lamp holder from the
clear lens body. Pull the bulb from the socket and replace by reversing
the above steps. CAUTION: The replacement bulb must be the same
rating as the factory installed bulb (standard automotive type #912).
HOT TUB CARE AND MAINTENANCE
Draining Your Hot Tub
Under normal usage, you should change the water in your hot tub every 3-4 months. To drain hot tubs equipped with the
Quick Drain™ System, first turn off electrical power to your hot tub. Screw on either the garden hose or 1-1/4” barbed adapter
