5
3. USING THE APPLIANCE
LOADING THE RACKS
TOP RACK
- depending on model
Long utensils (kitchen knives) must be placed with the tips
towards the appliance.
BOTTOM RACK
- depending on model
Sharp utensils that could injure must be arranged with the tips facing downwards. Arrange dishes so that residual water does
not remain in cavities and the spray arms can turn freely.
Only use dishwasher-friendly crockery. Do not use the appliance to wash items in wood, aluminium, tin, silverware or
decorated dishes (unglazed).
WASH CYCLE
The appliance door must be closed and the water tap open.
To add dishes, open the door with caution:
steam escapes.
Close the door. The programme resumes from where it was interrupted.
The wash cycle can be stopped at any time, doing a RESET.
PROGRAMME END
Take care when opening the door, as
hot steam
can escape
.
Press the
OFF
button only after the START button indicator has gone off. All the indicators go off. Unload the racks, starting from the bottom one in
order to prevent any residual water dripping onto the dishes in the appliance.
For better drying of dishes briefly open the appliance door before unloading, so that the steam can come out. The underside of
the kitchen worktop must be protected (see “Maintenance and Installation” instructions).
Multipurpose support
A
Three possible positions for long for utensils, cups
and glasses.
Dish holder
B
In horizontal position for cups/long utensils, in raised
position for plates and stemware.
Adjustable glass holder
C
Depending on the position, for small glasses or
stemware.
Cutlery basket
D
Place in the top rack when selecting the “Half load/
Multizone” function.
Rack vertical height
adjustment
E
The top rack height can be adjusted even when
loaded.
Lower adjustment: pull the two handles
E
outwards
and lower the rack.
Upper adjustment: pull the two handles
E
up until
the rack fits in place (standard
position).
The two handles
E
must be level.
Wash without top rack
If the appliance is equipped with the adjustable retainers shown in the figure the
top rack can be removed to wash large plates and trays, etc. Open the two
retainers
F
and remove the rack from the guides.
When the top rack is inserted the retainers must always be
closed.
F
F
Retainer
closed
Retainer
open
Plate holder
G
Partially folding for maximum rack
loading flexibility.
Cutlery basket
H
or
Cutlery basket
J
The grill element
I
supplied can be
inserted to keep cutlery separate.
Zone
K
Intensive wash with
“Power
Clean”
.
Changing the programme in progress/Resetting
- Keep the START button pressed for 2 seconds until the
START indicator goes off.
- (Water drains for up to 60 seconds).
- The appliance is now ready to be restarted.
Fitted models
- Press the START/RESET button (for 2 seconds).
-Close the door.
- (Water drains for up to 60 seconds).
- The appliance is now ready to be restarted.
