Care and Maintenance
Cleaning the filters:
1. Rotate the microfilter
counter-clockwise (in the
direction of the arrow “0”)
and extract it (E).
2. Place the microfilter/wide-
mesh central filter unit on a
flat surface and push the
handle of the microfilter (F).
Extract the wide-mesh filter
by pushing it forward (G).
3. Remove the fine-mesh
filter (H).
4. Clean all filters under
running water, paying
attention not to bend the
fine-mesh filter.
Check that no impurities are
left inside the dishwasher!
5. Remounting: insert the
wide-mesh filter in the
microfilter (click should be
heard!) Insert the fine-mesh
filter. The filter must be
fitted under both tabs.
Insert the microfilter/wide-
mesh central filter unit and
turn clockwise to lock (in
the direction of arrow “1”),
until the dotted lines on the
microfilter and fine-mesh
filter are aligned.
The filter unit must be
correctly assembled to
ensure good wash
results!
H
G
F
4gb94056.fm Page 9 Thursday, October 10, 2002 4:19 PM
