10
CARE AND MAINTENANCE
Before cleaning or carrying out maintenance, switch off the appliance,
disconnect the mains plug and turn off the water tap.
Cleaning the outside of the appliance:
To clean the outside of the appliance, use a neutral detergent and a
damp cloth.
Clean the control panel with a damp cloth only.
Do not use abrasive detergents.
Cleaning the inside of the dishwasher:
Regularly wipe the door seal and inside of the door with a damp cloth
to remove any food residue.
Upper spray arm:
1.
Slacken the fixing nut (
A
) (by turning it counter-clockwise) and
detach the spray arm (
B
) by pulling it down.
2.
Rinse the nozzles.
3.
To remount the spray arm, align it and then tighten the fixing nut
(by turning it clockwise)
,
paying attention not to bend it.
The fixing nut must be tightened until it clicks!
Make sure the spray arm rotates freely.
Lower spray arm:
1.
Remove the spray arm by pulling it upwards (
C
).
2.
Rinse the nozzles.
3.
To remount the spray arm, align it with the mounting and insert it
by pushing it down.
Make sure the spray arm rotates freely.
A
B
C
69694607GB.fm Page 10 Wednesday, August 8, 2007 11:22 AM
Black process 45.0° 150.0 LPI
