12
Do not use the dishwasher if it has been
damaged in transit. Consult your local retailer or
our After-Sales Service.
(Refer to the separate installation instructions
booklet)
Water inlet and drain:
•
Observe any special regulations issued by your
local Water Board.
•
Make sure the inlet and drain hoses are kink-free
and are not crushed.
•
If the hose length is not sufficient, please contact
your local dealer or our After-Sales Service.
•
The inlet hose must be securely screwed on to
the water tap to prevent leaks.
•
The inlet water temperature varies according to the
model installed: inlet hose marked 25° C Max:
maximum temperature 25° C.
All other models: maximum temperature 60° C.
•
When installing the appliance, make sure the drain
water discharges correctly (if necessary, remove
the plug from the sink spigot).
•
Fix the drain hose to the spigot with a clamp to
prevent it from coming off during operation.
•
For appliances with water-stop system only: if the
water connections are made correctly, the
water-stop system safeguards your home against
damage caused by flooding.
Electrical connection:
•
Closely adhere to local Electricity Board
regulations.
•
Voltage information is shown on the rating plate
mounted inside the door on the right hand side.
•
The appliance must be earthed as prescribed by
law.
•
Do not use extension leads or multiple adapters.
•
Before carrying out maintenance, disconnect the
mains plug.
•
The power cable must only be replaced by a
qualified technician.
CONNECTIONS
