49
Water Connection
Cold water connection
Connect the cold water supply hose to a threaded 3/4(inch) connector
and make sure that it is fastened tightly in place. If the water pipes are
new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is
needed to avoid the risk of the water inlet to be blocked and damage
the appliance.
Please close the hydrant after using.
Drain hose Connection
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink,
making sure to avoid bending or crimping it. The top of the hose must be less than 1000mm.
WARNING:
NOTE
The top of the hose must be
less than 1000mm.
Drain pipe
Counter
Front
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B
