43
Wash Cycle Table
NOTE
•
Meaning: need to fill rinse into the Rinse-Aid
Dispenser.
• * This programme is the test cycle. The
information for comparability test in
accordance with EN 50242, as follows:
• Capacity: 9 setting;
• Position Upper basket: upper wheels on rails;
• Rinse aid setting: 6;
• Pl: 0.49w;
• Po: 0.45w.
STARTING A WASHING PROGRAMME
Program
Cycle selection
information
Description
of cycle
Detergent
pre/main
Running
time (min)
Energy
(Kwh)
Water
(l)
Rinse
Aid
Intensive
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
Pre-wash(50°C)
Wash (65°C)
Rinse
Rinse
Rinse(65°C)
Drying
3/22g 160 1.3 16
Normal
For normally soiled loads,
such as pots plates glasses
and lightly soiled pans.
Pre-wash(45°C)
Wash (55°C)
Rinse
Rinse (65°C)
Drying
3/22 g 175 1.0 12
.
* EN 50242
This is standard programme,
it is suitable to clean
normally soiled tableware
and it is the most efficient
programme in terms of its
combined energy and water
consumption for that type of
tableware.
Pre-wash
Wash (50°C)
Rinse(65°C)
Drying
25 g 170 0.75 8.5
Glass
For lightly soiled crockery
and glass.
Pre-wash
wash(40°C)
Rinse
Rinse(60°C)
Drying
20 g 110 0.75 12
1 Hour
For lightly soiled loads that
do not need excellent drying
efficiency.
Pre-wash (50°C)
Wash(65°C)
Rinse (55°C)
Drying
3/22g 60 0.85 9.0
Rapid
A shorter wash for lightly
soiled loads and quick wash.
Wash (40°C)
Rinse
Rinse (45°C)
3/22g 40 0.55 10
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load
the lower basket first, then the upper one (see the section entitled “Loading the Dishwasher”).
2. Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4. Close the door, press the On/Off button to switch on the machine.
5. Press the program button , you can select your desired program. If a program is selected, the response
icon will light. Then press the Start/Pause button, the dishwasher begins to start.
NOTE: When you press the Start/Pause button to pause during washing, the running indicator will stop
blinking and the dishwasher will mooing every minute unless you press the Start/Pause button to start.
