Dil ID: 9
Dil Adı: germany
Dil Kodu: de1tayfun Produkte der Marke Whirlpool
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



48
NOTE: When you press the Start/Pause button to pause during washing, the LED display window
will stop blinking and the dishwasher will mooing every minute unless you press the Start/Pause button to
start.
Change the Program...
Premise:
1. A cycle that is underway can only be modified if it has only been running for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drained the wash
water. If this is the case, the detergent dispenser must be refilled (see the section entitled “Loading the
Detergent”).
2. Press the Start/Pause button, the machine will pause, press the program button more than 3s then you
can change the program to the desired cycle setting (see the section entitled “Starting a wash cycle. . .”).
3. The LED display shows the state of the dishwasher:
a) The LED shows “– : – –” . . . . . . . . . . . . . . . . . Stand by
b) The LED shows “H MM” and not blinking: . . . Being paused
c) The LED shows “H MM” and blinking . . . . . . . Running
NOTE: If you open the door during a wash cycle, the machine will pause. the LED display window
will stop blinking and the buzzer will mooing every minute unless you close the door. After you close the
door, the machine will keep on working after 10 seconds.
Forgot to Add a Dish?
A forgotten dish can be added any time before the detergent cup opens.
1. Press the Start/Pause Button to stop the washing.
2. Open the door a little .
3. After the spray arms stop working, you can open the door completely.
4. Add forgotten dishes.
5. Close the door.
6. Press the Start/Pause Button, the dishwasher will run after 10 seconds.
At the End of the Wash Cycle
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop.
Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of the
dishwasher. Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and
utensils while they are still hot and more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
The program light is on but is not blinking, only in this case the programme has ended.
1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15
minutes before removing from the appliance. Open the dishwasher's door, leave it ajar and wait a few
minutes before removing the dishes. In this way they will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside. Empty the lower basket first and then the upper one.
This will avoid water dripping from the upper Basket onto the dishes in the lower one.
It is dangerous to open the door when washing, because the hot water may scald you.
WARNING: