Produkte der Marke Vortech Engineering

P/N: 4GC020-010

15SEP01 V1.1

(88-95 GM Lt Trk(4GC))

12. FINAL REASSEMBLY & CHECK

A. Refit the upper fan shroud.

B. Reconnect the battery.

C. If your vehicle has gone over 10,000 miles since

its last spark plug change, you will need to

change the spark plugs now before test driving

the vehicle.

D. Check all fittings, nuts, bolts and clamps for

tightness. Pay particular attention to oil and fuel

lines around moving parts, sharp edges and

exhaust system parts. Make sure all wires and

lines are properly secured with clamps or tie

wraps.

E. Check all fluid levels, making sure that your

tank(s) is filled with 92 octane or higher fuel

before commencing test drive.

F. Start engine and allow to idle a few minutes,

then shut off.

G. Recheck to be sure that no hoses, wires, etc. are

near exhaust headers or moving parts and for

signs of any fluid leakage. Check ignition timing

to make sure it is set to stock specifications

before commencing test drive.

H. PLEASE TAKE SPECIAL NOTE: Operating

the vehicle without the Supplementary Fuel

Injection Computer or any other subassem-

blies completely and properly installed and work-

ing may cause FAILURE OF MAJOR ENGINE

COMPONENTS.

I. Test drive the vehicle.

J. The supercharger drive belt stretches initially

and will require adjustment between 250 and

400 miles.

K. Read the STREET SUPERCHARGER SYS-

TEM OWNER'S MANUAL AND WARRANTY

REGISTRATION FORM within thirty (30) days

of purchasing your supercharger system to

qualify.

WARNING: Do not attempt to operate the ve-

hicle until ALL components are

installed and ALL operations are

completed including final check.

Fig. 12-a