10 D-302887
MESSAGES THAT MAY BE REPORTED TO INSTALLER AFTER TEST:
LCD MESSAGE DESCRIPTION
1
Unit is Ok GSM (Global System for Mobile Communications) / GPRS (General Packet Radio
Service) is working properly
2
GSM Com. Loss RS-232 communication with modem failed
3
Pin Code Failure Missing or wrong PIN Code. (Only if SIM card PIN Code is enabled.)
4
GSM net. failure Modem failed registration to local GSM network (+Creg …)
5
SIM card failure SIM card is not installed correctly in GSM Modem
6
GSM not enrolled GSM auto enroll failed to detect GSM modem
7
No GPRS service GPRS network is not available to work with the current SIM card, meaning the
SIM card is not open for GPRS. (CGATT). (See note 1)
8
GPRS Conn. Fail Local GPRS network is not available or wrong.
GPRS APN, User and Password. (AT+GPRS).(See note 1)
9
Srvr Unavailable Fail opening TCP socket with server. Problem with server or wrong server IP or
no acknowledge received from server. (AT#SKTD)
10
Srvr IP Missing Server IP # 1 and #2 are not configured
11
APN Is Missing APN (Access Point Name) is not configured
12
SIM Card Locked After entering a wrong pin code 3 consecutive times, the SIM is locked. To unlock
it a PUK (Pin Unlock Key) number should be entered. The PUK cannot be entered
by the PowerMax.
(This can be fixed by installing the SIM in a personal cellphone and performing the unlock function)
13
Denied By Server The IPMP replied "DUH" to SIA-OVER-IP event message. "DUH" means that the
IPMP cannot handle the message because the panel is not defined or the
message is not decrypted correctly.
Note 1: After SIM card provisioning, the control panel must be power cycled!
15. DIAGNOSTIC TESTING
Resultant DisplayAction(s)
2.
1.
4.
5.
Enter into installer
menu (see par. 8)
9 timesPress
Press
Walk test the entire
protected site to trigger all
the sensors.
10. DIAGNOSTICS
DIAG. TESTING
6.
Review all the results by
pressing
repeatedly
to see all the results.
If you get a “POOR” display
from a certain sensor, relocate
it and re-test until the result is
“GOOD” or “STRONG”.
FRONT DOOR
Alternately
Z1 STRONG
BACK DOOR
Alternately
Z2 GOOD
3.
Press
WL SENSORS TEST
