5.4 Cleaning the filter unit
• Periodically inspect the filter unit (ref. A fig. 5-04) and, if necessary, clean it
under running water (at room temperature), using a stiff brush. To remove
the filter, grip the tabs, turn anticlockwise and lift upwards;
• push the centre filter (ref. A fig. 5-05) from the underside to remove it from
the micro-filter;
• separate the two parts which make up the plastic centre filter by pressing
the body of the filter in the zone shown by the arrows (ref. B fig. 5-05);
• remove the centre filter by lifting it upwards.
• after cleaning, remount the filter unit, joining the two parts comprising the
centre filter by pushing slightly until they click into place; insert the centre
filter into the micro-filter (see fig. 5-05). Reposition the filter unit (ref. A fig.
5-04) into its seat, turning it clockwise until it locks.
