9
Link.
1~4
Link status Green On An active station is connected to the corresponding LAN
port.
Blinking The corresponding LAN port is sending or receiving data. Speed
10/100
Data Rate
Green
On Data is transmitting in 100Mbps on the corresponding LAN
port.
Reset To reset system settings to factory defaults
Getting Started
Procedure for Hardware Installation
Decide where to place your Wireless Broadband Router
You can place your Wireless Broadband Router on a desk or other flat surface, or you can mount
it on a wall. For optimal performance, place your Wireless Broadband Router in the center of
your office (or your home) in a location that is away from any potential source of interference,
such as a metal wall or microwave oven. This location must be close to power and network
connection.
Setup LAN connection
Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one of
the LAN ports of this product.
Wireless LAN connection: locate this product at a proper position to gain the best transmit
performance.
