Washing a load of laundry _13
Pause Option (Stop & Adding laundry Function)
When pushing the Start/Pause button, the door is unlocked after two or three minutes.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the (On/Off) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature. (cold(0˚C), 30˚C, 40˚C, 60˚C, 95˚C)
8. Press to Rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9.
Press the Spin button to select the spin speed. [ 0, 400, 600, 800, 1000, 1200 or 1400 revolutions
per minute(rpm)]
The rinse hold program allows you to take clothes that are dripping wet out of the washing
machine.
0 : No spin , Non display : Rinse hold
10. Press the button repeatedly to cycle through the available delayed start options (from 3 hour
to 24 hours in one hour increments). Displayed hours means the time of finished washing-
cycle.
11. Press the Start/Pause button and the machine will begin the cycle.
02 Washing a load of laundry
WF7652S8R-02410J_EN.indd 13 2007-06-18 ¿ÀÈÄ 2:21:18
