18
Touch Control
7
Change the code set by tapping or and then
select <Send IR>.
If the external device turns on or off, select <Apply> to
register the external device.
8
If you can’t find codeset on the list, tap <Learn> to
start the remote’s external device registration process.
• Tap <Help> for learning guide or tap <OK> to start
learning.
9
You must now assign the control buttons on the
device’s remote to corresponding buttons on the LCD
remote. To begin, tap a button on the LCD remote’s
screen to which you want to assign a button from the
device’s remote.
• The selected button blinks.
10
Press the corresponding button on the device’s remote.
• When the button LCD remote’s stops blinking, the
assignment is complete. Assign the other buttons in the
same way.
• To register the Channel, Volume and Mute buttons on
an external device, tap <VOL/CH> at the top of the
Touch Control.
11
Select <OK> to complete the registration.
Send IR
Apply
Send IR to device
POWER
Detail
Codeset
VOL/CH
Navigation
Learn
OK
Navigation
Select a button, and enter the
device remote control button
you wish to learn within 10
seconds. Press OK to fi nish
learning.
Help OK
[BN68-03092A]Touch control-01L03.indb 18 2010-05-27 오후 3:50:14
