• Aerial (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the
desired channel.
Music / Photo (when the Source is set to USB): Select a
folder in the USB device containing music or photo les to
be played when the TV is turned on automatically.
–
If there is no music le on the USB device or the
folder containing a music le is not selected, the timer
function does not operate correctly.
–
When there is only one photo le in the USB device,
the slide show will not play.
–
If a folder name is too long, the folder cannot be
selected.
–
Each USB you use is assigned its own folder. When
using more than one of the same type of USB, make
sure the folders assigned to each USB have different
names.
–
It is recommended that you use a USB memory stick
and a multi card reader when using On Timer.
–
The On Timer function may not work with USB
devices with a built-in battery, MP3 players, or PMPs
made by some manufacturers because these devices
take a long time to be recognized.
• Off Timer: You can set up three separate Off Timer
congurations. (Off Timer 1, Off Timer 2, Off Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at your convenience. If you
select Manual, you can set up the day you want to activate
the timer.
✎
The c mark indicates the day you’ve selected.
Time: Set the hour and minute.
¦ Economical Solutions
Eco Solution
O MENUm → System → Eco Solution → ENTERE
• Energy Saving: This adjusts the brightness of the TV in
order to reduce power consumption.
• No Signal Power Off: To avoid unnecessary energy
consumption, set how long you want the TV to remain on if
it’s not receiving a signal.
• Auto Power Off: The TV will be automatically turned off
when no user operation is received for 4 hours.
✎
If the Auto Power Off option is set to Off, the TV
will stay on even if no operations are performed on
the T V.
¦ Other Features
Menu Language
O MENUm → System → Menu Language → ENTERE
Set the menu language.
Screen Burn Protection
O MENUm → System → Screen Burn Protection →
ENTERE
To reduce the possibility of screen burn, this unit is equipped
with Pixel Shift screen burn prevention technology. Pixel Shift
moves the picture slightly on the screen. The Time function
setting allows you to programme the time between movement
of the picture in minutes.
Your TV also has the following additional screen burn
protection functions:
• Pixel Shift
• Auto Protection Time
• Scrolling
• Side Grey
• Pixel Shift: Using this function, you can set the TV to move
pixels minutely on the PDP screen in a horizontal or vertical
direction to minimize after images on the screen.
✎
Available Pixel Shift Settings and Optimum Settings
Item TV / HDMI
Horizontal 0~4 4
Vertical 0~4 4
Time (minute) 1~4 min 4 min
✎
The Pixel Shift value may differ depending on the
monitor size (inches) and mode.
✎
This function is not available in the Screen Fit mode.
20
Preference Features
English
PF4000-RU_ENG.indd 20 2013-02-20 �� 3:09:37
