English-21
OPERATION
4
Press the UP/DOWN
buttons to select “Digital
Channel”, then press the
ENTER button.
Press the
UP/DOWN
buttons to select “STD”,
“HRC”, or “IRC”, press the
ENTER button.
Press the UP/DOWN
buttons to select “Analog
Channel”, then press the
ENTER button.
Press the UP/DOWN
buttons to select “STD”,
“HRC”, or “IRC”, press the
ENTER button.
Press the UP/DOWN
buttons to select “Start”,
then press the ENTER
button to memorize the
channels.
STD, HRC and IRC
identify various types of
cable TV systems.
Contact your local cable
company to identify the
type of cable system that
exists in your particular
area.
At this point the signal
source has been selected.
Proceed to “Storing
Channels in Memory”.
5
The TV will begin
memorizing all of the
available channels.
After all the available
channels are stored, the
Auto program menu
reappears. Press the
ENTER button when
channel memorization is
complete. “Set to daylight
savings time.” menu is auto
matically displayed.
01 BN68-00803A-00Eng.qxd 1/5/05 8:54 PM Page 21
