21
English
Menu Item initial Value Description
Eco
Solution
Energy Saving Off
Adjusts the brightness of the TV to reduce power consumption.
y Off: Turns off the energy saving function.
y Low: Sets the TV to low energy saving mode.
y Medium: Sets the TV to medium energy saving mode.
y High: Sets the TV to high energy saving mode.
Logo/
Message
Welcome Message OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome
Message
Edits the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is turned
on, the Logo is displayed, before the signal from the initial source, for the
amount of time set in "Logo Display Time".
Hospitality Logo
DL
…
Downloads the Hospitality logo.
Hospitality logo file requirements:
y BMP or AVI files only.
y Max file size : BMP - 960 X 540. AVI - 30MB.
y The file can only be named samsung.bmp or samsung.avi.
Logo Display Time … Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto
Intialize
OFF
If you set Setting Auto Initialize to On, and the TV's power is turned off and on,
the guest side menu items are restored to their cloned values. See page 29.
REACH
Solution
REACH 3.0 OFF
OFF:Close REACH 3.0
ON:Open REACH 3.0
REACH 2.0 OFF
OFF:Close REACH 2.0
ON:Open REACH 2.0
REACH Channel …
87:Assign a DTV channel number to carry the update REACH data. This
channel number must be the same as the number set on the Reach server.
Group ID …
All:Select the group ID of the REACH server. (Refer to the REACH server
manual for more details)
IPG Room Type …
You can receive up to 3 EPG information headed to the Americas according
to Room Type from SI, and it displays the appropriate channel list and EPG
information according to the value set on TV.For IPG Room Type, there are
Default / Public / Roomtype3 within the hotel Factory Install menu, and its
default value is Default.
Ticker …
y On : The TICKER content is displayed.
y Off : The TICKER content is not displayed.
REACH Update
Time
…
Lets you set when data such as updated SW, cloning files, and S-LYNC
REACH contents is downloaded from the REACH server to the TV :
y 1hour : Every hour
y 2hour : Every 2 hours
y 12:00 am : every 12:00 a.m.
y 12:00 pm : every 12:00 p.m.
y 2:00 pm : every 2:00 p.m.
REACH Update
Immediate
…
y On : Whenever the TV enters standby mode (the power cord is plugged
in and the power is off), the REACH data is updated on the TV.
y Off : The REACH data is only updated on the TV at the REACH server
update time.
Room Number … Setting Room Number.
REACH 2.0 TV
Sound
…
OFF:Close REACH 2.0 TV Sound
ON:Open REACH 2.0 TV Sound
REACH 2.0 Server
Version
… 0000:Displays the current REACH data version.
[HC670_677_678-ZA]Install Guide-X0ENG.indd 21 2014-03-17 10:02:27
