2 3
How to use as PC Monitor
1. Turn on the PDP and press on the remote controller.
2.
Use to select RGB1(Analog) and then press .
(If the PC output is set to Digital, select RGB2(Digital).)
3. This PDP does not support Plug & Play function. When setting the PDP, select default.
4. Set the PC video output mode to VGA (640×480)/ SVGA (800×600)/ XGA (1024×768). In the
mode higher than SXGA (1280×
1024), "Out of Range" message appears. Be sure to change
your PC video format to less than XGA mode. (Please refer to page 51 for the modes that PDP
supports)
