Dil ID: 9
Dil Adı: germany
Dil Kodu: de8tayfun Produkte der Marke Philips-magnavox
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



23
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
OPERATING BLU-RAY
BLU-RAY SETTING TROUBLESHOOTING
INFORMATION
! Channel List
The channels selected here can be skipped when selecting the channels
using [CH + /
-
].
Those channels can still be selected with [the Number buttons].
1
Press [MENU / EXIT] to display the main menu.
2
Use [Cursor K
/
L] to select “SETUP”, then press [OK].
or
Channel List
Add Channels
Antenna
Au t o progr a m
PICTURE
SOUND
FEATURES
LAN G UAG E
SETUP
BLU - R AY
USB
3
Use [Cursor K
/
L] to select “Channel List”, then press
[OK].
or
PICTURE
SOUND
FEATURES
LAN G UAG E
SETUP
BLU - R AY
USB
Channel List
Add Channels
Antenna
Au t o progr a m
4
Use [Cursor K
/
L] to select the channel you want to
remove, then press [OK].
or
Ch S el ect Wat ch /Skip
Ba c k
BAC K
OK
Highlight channels for Ch Up/Down key
selection.
11.2
11.3
DTV
DTV
PICTURE
SOUND
FEATURES
LAN G UAG E
SETUP
DTV 11.1
BLU - R AY
USB
The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH + /
-
].
To reactivate a removed channel, use [Cursor K
/
L] and
press [OK]. The registered channels are highlighted.
When you remove a main channel, its subchannels
are removed as well.
Note:
The channel with the “DTV” indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [MENU / EXIT] to exit.
! Add Channels
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setting.
1
Press [MENU / EXIT] to display the main menu.
2
Use [Cursor K
/
L] to select “SETUP”, then press [OK].
or
Channel List
Add Channels
Antenna
Au t o progr a m
PICTURE
SOUND
FEATURES
LAN G UAG E
SETUP
BLU - R AY
USB
3
Use [Cursor K
/
L] to select “Add Channels”, then press
[OK].
or
Channel List
Add Channels
Antenna
Au t o progr a m
PICTURE
SOUND
FEATURES
LAN G UAG E
SETUP
BLU - R AY
USB
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [OK].
11
For analog channels, select a channel to be
added using number keys.
For digital channels, you must perform
Autoprogram function.
Add channels
Ch Change
Ba c k
BAC K
PICTURE
SOUND
FEATURES
LAN G UAG E
SETUP
BLU - R AY
USB
5
Press [MENU / EXIT] to exit.
Note:
If setup completes successfully,
Added to the channel list” is displayed.
If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.
By using [CH
+ /
-
], you can select the memorized channels
only.