Before using for the first time
21
Displaying and setting the water
har
dness
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the
Start butt
on in and whilst
holding it in switch the dishwasher
on using the button
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
P
ress the button twice.
The indica
tor will flash rapidly twice
at intervals.
The value set for the water hardness is
shown as a figur
e after in the display
(see chart).
will star
t flashing in the display.
This is the factory default setting of
15 °d.
Use the Start butt
on to select the val‐
ue which equates to your water hard‐
ness level.
Each press on the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.
