To fit the bottom frame strip
Recess height 876 mm:
^ Push the bottom frame strip (8) over
the lower ends of the side frame
strips (5).
Recess height 882 mm:
^ First push the spacer bar (9) from be-
low onto the bottom frame strip.
^
To do this loosen the nuts in the
spacer bar, push the spacer bar onto
the bottom frame strip and tighten the
nuts again.
^
File off any protruding screw ends.
Recess height greater than 882 mm:
^
In this case a package must be put
together of spacer bars (special ac
-
cessory) to suit the niche height and
pushed under the bottom frame strip.
To fit the plinth facia
^ Fit stoppers (7) into the "Key-holes" in
the side frame strips A.
^ Pull the handle for the plinth facia
(11) forward and push outward until it
engages B.
^
Fit rubber bands (12) over the spacer
pieces and into the plinth facia.
^
Flap up the plinth facia.
Building in
17
