7.Fitting the building-in frame
and installing the dish-
washer
Apply moisture protector
^
Seal the cracks between the side
walls and the recess floor and any
unprotected cut surfaces with the sili
-
cone sealant provided.
Screw the foot holds and edge
protector in place
^
Secure the foot holds (6) with two
wood screws each 4 x 15 (15) to the
side walls of the housing unit.
The distance from the front edge of
the unit to the front edge of the foot
holds must measure 450 mm .
The bottom bracket must rest on the
recess floor.
^
Secure the edge protector to the front
edge of the unit floor using two
3.5 x 9.5 mm flat head screws. This
protects the front edge of the unit
base when fitting or removing the
dishwasher.
Fitting the side and top frame strips
With a recess width of 562 mm (unit
wall thickness 19 mm) spacer pieces
(3) fitted to the side frame strips should
be replaced by the thinner spacers
should be replaced by the thinner
spacers supplied (4).
^
Unfold spacer (3) and remove.
^
Fit spacer (4) and fold back in.
Building in
12
