Checking the programmed water
hardness level
^
Switch the dishwasher off using the
K button.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the K button.
Keep the Start/Stop button pressed in
until the Start/Stop indicator comes
on.
^
Turn the programme selector to the
"3 o'clock" position.
The Wash/Rinse indicator will flash for
the number of times which corresponds
to the water hardness level which has
been set (see chart).
^ Switch the dishwasher off using the
K button.
Before using for the first time
16
