Article No. 01-6-2 Cont’d.
PATS DIAGNOSTIC (Continued)
System Types A
Action and D System Type B System Type C System Type E
Erase Ignition Keys Requires only one (1) Requires two (2) Requires two (2) Requires two (2)
Procedure With Service key (2 keys for Mark keys keys keys
Card VIII)
1) Service Card V2.0 1) Service Card V1.0 1) Must use Service 1) Service Card V6.0
or higher. or higher. Card V6.0 or higher. or higher.
Select: Select: Select: Select:
a) Service Bay a) Service Bay a) Service Bay a) Service Bay
Functions Functions Functions Functions
b) PATS (SCIL for b) PATS b) VIC for Continental b) PCM
Mark VIII)
or
HEC for Mustang,
Town Car,
Expedition,
F-150/250, and
Navigator
or
ICM for LS and
Windstar
c) Ignition Key Code c) Enter Security c) Enter Security c) Enter Security
Erase Access (10 minute Access (10 minute Access (10 minute
delay) delay) delay)
NOTE: WILL TAKE
2-3 SECONDS WITH
A PROGRAMMED
PATS KEY OR 8
MINUTES WITH AN
UNPROGRAMMED
PATS KEY
d) Ignition Key Code d) Ignition Key Code d) Ignition Key Code
Erase Erase Erase
2) Turn ignition key 2) Turn ignition key 2) Turn ignition key 2) Turn ignition key
OFF and disconnect OFF and disconnect OFF and disconnect OFF and disconnect
Data Link Connector DLC. DLC. DLC.
(DLC).
3) Cycle key in 3) Cycle Key 1 in 3) Cycle Key 1 in 3) Cycle Key 1 in
ignition to RUN. First ignition to RUN. ignition to RUN. ignition to RUN.
key will program.
(Mark VIII only: Cycle
the second key in
ignition to RUN).
Attempt to start
vehicle.
4) Program additional 4) Cycle Key 2 in 4) Cycle Key 2 in 4) Cycle Key 2 in
keys using Spare ignition to RUN. ignition to RUN. ignition to RUN.
PAGE 6
