Filling the salt container
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening of
the salt container.
5.
Turn the cap clockwise to close the
salt container.
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after
you fill the salt container, start a pro-
gramme.
Filling the rinse aid dispenser
20
30
1
2
3
4
-
+
M
A
x
A
B
C D
1. Turn the cap (C) counterclockwise to
open the rinse aid dispenser.
2.
Fill the rinse aid dispenser (A), no more
than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Put the cap in position and turn it
clockwise to close the rinse aid dis-
penser.
Fill the rinse aid dispenser when the
lens (D) is clear.
You can turn the selector of the re-
leased quantity (B) between position 1
(lowest quantity) and position 4 (high-
est quantity).
DAILY USE
1. Open the water tap.
2. Turn the programme knob until the pro-
gramme marker is aligned with the pro-
gramme you want to set. Make sure
that the appliance is in setting mode, re-
fer to “Setting and starting a pro-
gramme”. Set the correct programme
for the type of load and the degree of
soil.
• If the salt indicator is on, fill the salt
container.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
leonard 29
