Hardware TV Instructions
4. Alternate PIP
Press the PIP button on the remote control to alternate between the main picture and
sub-picture.
Note: The interface and functions shown in the instructions below are for reference
only.
Note: The touch function cannot be used in Hardware TV mode.
Note: You must be in TV mode to perform these operations.
2. Language settings
Press the MENU button on the remote control, then select Setup -> Menu language.
1. Scan for channels
Press the MENU button on the remote control, then select Setup -> Channels to scan
for channels and store them in the TV automatically.
Note: The default password is "8888". Change the password by using the Password
option.
3. Picture In Picture (PIP) Size
Press the MENU button on the remote control, then select PIP -> Size to adjust the size of
the sub-picture.
Note: If a channel is locked using the Child Lock function, press the Digital signal
channel break
button to unlock it.
Note: The size of the PIP sub-picture can only be adjusted in the main TV mode interface.
Note: When using PIP mode, sound is played for the main program only.
5. Password settings
You need to enter the original password before setting a new password or removing the
password.
The default password is "8888".
Note: If you forget the password you entered, enter the Super Password "1357" to
set a new password.
6. Record TV
The Hardware TV must be turned off in order to use the recording function. Once it is
turned off, use Windows Media Center or the Total Media software in PC mode to record
TV programs.
