DISHWASHER CYCLES AND OPTIONS
Options
Delay Start
Cycles
■ CANCEL/RESET-
WASH CYCLES
CYCLE SOIL LEVEL
*TIME (mins.)
Without options
Water Usage
Gallons Liters
Typical Maximum
Pots & Pans *
Cleans items having baked-on or hard dried food soils.
These items may require soaking or hand scouring.
Light-Medium
130 1 35 6.1
23.2
Heavy
130 1 35
7.2 27.4
Normal Wash *
Thoroughly cleans normal loads having loosely attached
normal soiling.
Light - Medium
100 105 2.7
10.4
Heavy
115 119 5.9 22.5
China Gentle *
Designed to be used with your fragile china and glass
ware, allowing you to get it perfectly clean without
the hassle of hand washing or worry of damage in the
dishwasher.
All Soil Levels
80 3.5 13.1
Fast Wash
Cleans lightly soiled dishes and reduces overall wash
time. Use this cycle to clean glasses and dessert dishes
that may need to be re-used at the same event
All Soil Levels
39 3.5 13.1
Quick Rinse
A ten minute rinse for reducing food odor and keeping
food residue from drying. Do not use detergent. Use this
rinse cycle for rinsing dishes, glasses and silverware that
will not be washed right away.
All Soil Levels
9
1.2
4.7
Adding options will increase or decrease cycle time. See
* These cycles are NSF certified
‘Options” information section.
NSF INFORMATION
A dishwasher or dishwasher cycle that is certified by the
NSF international meets very strict requirements of wash
time and water temperature to ensure dishware and
kitchenware sanitization. These requirements are explained
in the document NSF/ANSI 1 84, Residential Dishwashers.
More information on NSF Certification is available at the
NSF website,
http: / / www.nsfconsumer.org/home/appliances.asp.
Your dishwasher is NSF certified. The dishwasher cycles
that are NSF certified are shown in the chart below. When
these cycles are complete, the “Sanitized” indicator on your
dishwasher control panel will illuminate. However, if your
1 2
household water supply is too hot your dishwasher’s heating
time may be reduced, and the Sanitized indicator may not
illuminate.
The cycle times listed in the Use and Care Manual are
based on normal soil loads and 1 20°F incoming water and
will vary based on your actual conditions.
NOTE: Only sanitizing cycles have been designed to meet
the requirements of 6 for soil removal and sanitization
efficacy. There is no intention, either directly or indirectly,
that all cycles on a certified machine have passed the
sanitization performance test.
