Robot-TP-65M
Page 3
Equipped with an emergency stop and a 3-position deadman switch to
provide safe operation
1.4 External Overview
1.4.1 Front Panel
The front side of the Robot-TP-65M is a flat bezel panel TFT LCD screen surrounded by a
PC/ABS plastic frame. There are buttons and LED indicators located on the front panel.
The detailed information is described in the following sections.
Figure 1-2: Front View
1.4.1.1 LED Indicators
There are several LED indicators located along the top of the LCD screen (Figure 1-3).
Figure 1-3: LED Indicators
The descriptions of each LED indicator are listed below.
LED Indicator Description
Power
On: the robot is connected with a +12V power source
Off: the power cord is not attached or power supply failure
