ENWW 3-2
2 Insert a stack of paper, up to 19 mm (0.75 in.) or 150 sheets, print-side down along the
right side of the main paper tray, until it stops.
3 Slide the paper width and length adjusters in until they stop at the edges of the paper.
4 In the printer driver, change the print settings to match the paper size, type, source,
and orientation, and then click OK. (For instructions on accessing the printer driver,
see “Changing print settings.”)
Rear manual feed
To feed paper manually:
1 In the printer driver, click the Paper/Quality tab and select Manual Feed from the
Source is drop-down list. (For instructions on accessing the printer driver, see “Changing
print settings.”)
2 Change any other print settings if necessary and click OK.
3 Print your document.
4 When the Resume button blinks, insert paper print-side up into the rear manual feed at the
back of the printer, making sure that the edge of the sheet is aligned with the alignment
mark at the side of the slot.
5 Press the Resume button on the printer to start printing.
The rear manual feed is designed for printing on thicker paper like cardstock and photo paper
without bending or warping. This manual feed is designed to give you a straight paper path.
