232 A - Control-panel mode and setup menus ENWW
Collation Turns copy collation on or off. When collation is on, you can produce sets of
copies in the exact order that they were scanned. You must copy more than one
original to use the collation feature.
This feature can be used only with the ADF.
Collation is available only for the following copy options: Normal copy, COPY FULL
PAGE, MARGIN SHIFT, LEGAL->LETTER, A4->LETTER, LETTER->A4.
Quality Selects the setting for copy quality:
z NORMAL
Produces high-quality copy at reasonable speed. This is the recommended
setting for most copy jobs.
z BEST
Produces the highest quality for all media and eliminates the banding
(striping) effect that sometimes occurs in solid areas. BEST copies more
slowly than the other quality settings.
z FAST
Produces draft-quality copies at the fastest speed. The text is of comparable
quality to the NORMAL setting, but graphics might be of lower quality. This
setting reduces the frequency of ink cartridge replacement because it uses
less ink.
You can also reach the quality option by pressing Q
UALITY on the control panel.
Lighter/darker Adjusts the lightness and darkness of copies (from -4 to +4).
You can also reach the contrast option by pressing L
IGHTER/DARKER on the
control panel.
Tray Selects the input tray and paper type to use for media.
Paper size Selects the paper size:
z LETTER
U.S. letter size (8.5 by 11 inches)
z A4
A4 size (210 by 297 mm)
z LEGAL
Legal size (8.5 by 14 inches)
The option sets the size for both the original and the output, because it is
assumed that these are to be identical.
The option is not available for the following copy options: LEGAL->LETTER,
A4->LETTER, LETTER->A4.
Preset Applies a preset (a set of predetermined copy options) to a copy job.
See Using presets for more information.
Setup Opens the COPY SETUP menu. See COPY SETUP menu for an explanation of
the menu.
Menu item Description
