Overflow .
Whe n some malfunctions come on, the appliance will dis play error code s to warn you:
Longer inlet time.
F a ucets is not opened, or water inta ke is
restricted,or water pressure is too low.
Some element of dishwasher leaks .
T he R a pi d lig ht fl ic ke r fle etl y
T he Gl as s l igh t f lic ke r fleet ly
The dishes were not
loaded correctly .
See notes in " Loading the Dishwasher Baskets ".
Select a more int ensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rear range the it ems so that the sp ay can rot ate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you hav e soft water and select
a shortest cycle to wash the glasswa re and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the d ishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishw asher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket fir st. This prevents water form dropping off
dishes in the upper basket.
In short program the washing t emperature is lower.
This also lowers cleaning performance. Choose
a progra m with a long washing time.
Water drainage is more d ifficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerf ul enough.
Not enough detergent
was dispensed.
Items are blocking
the path of sp ay arm s.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get blocked.
r
Combin ation of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are r emoved
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
