Security
Feature Description
NAT/PAT Symmetric Network and Port Address Translation (NAT/PAT) with randomly generated ports
inclusive Multi NAT (1:1 translation of whole networks)
Policy based NAT/PAT Network and Port Address Translation via different criteria like IP protocols, source/destination
IP Address, source/destination port
Policy based NAT/PAT For incoming and outgoing connections and for each interface variable configurable
Content Filtering Optional ISS/Cobion Content filter (30 day test license inclusive)
Stateful Inspection Firewall Packet filtering depending on the direction with controling and interpretation of each single
connection status
Packet Filter Filtering of IP packets according to different criteria like IP protocols, source/destination IP
address, source/destination port, TOS/DSCP, layer 2 priority for each interface variable
configurable
Routing
Feature Description
Policy based Routing Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols
(Layer4), source/destination IP address, source/destination port, TOS/DSCP,
source/destination interface and destination interface status
Multicast IGMP Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous
distribution of IP packets to several stations
Multicast IGMP Proxy For easy forwarding of multicast packets via dedicated interfaces
Multicast inside IPSec tunnel Enables the transmission of multicast packets via an IPSec tunnel
RIP Support of RIPv1 and RIPv2, separated configurable for each interface
Extended RIP Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better
distribution of the routes; furthermore the possibility to define RIP filters for each interface.
Routing throughput (1518) 199 Mbps with 1518 Byte packets
Routing throughput (256) 198 Mbps with 256 Byte packets
Protocols / Encapsulations
Feature Description
PPP/MLPPP Support of Point to Point Protocol (PPP) for establishing of standard PPP connections,
inclusive the Multilink extension MLPPP for the bundeling of several connections
PPPoE (Server/Client) Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections
via Ethernet/DSL (RFC 2516)
MLPPPoE (Server/Client) Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides
support MLPPPoE)
PPPoA Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL
IPoA Enables the easy routing of IP via ATM
DNS DNS client, DSN server, DNS relay and DNS proxy
DYN DNS Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for
establishing of VPN connections
DNS Forwarding Enables the forwarding of DNS requests of free configurable domains to assigned DNS
server.
DHCP DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
Packet size controling Adaption of PMTU or automatic packet size controling via fragmentation
QoS
Feature Description
Policy based Traffic Shapping Dynamic bandwidth management via IP traffic shaping
Bandwidth reservation Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths
DiffServ Priority Queuing of packets on the basis of the DiffServ/TOS field
Layer2/3 tagging Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes
TCP Download Rate Control For reservation of bandwidth for VoIP connections
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
bintec RS232b
09.09.2010
Subject to technical
alterations
