Function 5: Voice mail programming IP E-Class Administrator’s Manual
D.
Function 552: Delivery/paging parameters
The sequence of programming is as follows:
1. CO line access — Enter the CO line group (9, 8, or 71–76) that is to be accessed for delivery.
Default: 9.
2. Maximum lines — Enter the maximum number of lines (in the selected CO line group) that the
system can access simultaneously. Make enough lines available to accommodate high notifica-
tion traffic (but be careful: if you make available all lines in the selected line group and high
notification traffic occurs, the system could tie up all lines).
Range: 1–19. Default: 1.
3. Pager dialing pause — When paging, the IP E-Class system will send the mailbox number to be
shown in the pager’s display. To allow time for the paging service to answer, enter the pause, in
seconds, to occur between when the IP E-Class system dials the pager number and when it then
dials the mailbox number.
Range: 0–20. Default: 6.
Function 56: Cascade paging mailboxes
In addition to individual mailbox paging, the IP E-Class system can support up to 10 cascade paging
mailboxes (520–529). These can be assigned to anyone who requires escalating levels of paging
beyond the single level available in all user mailboxes. In this function, you program the paging numbers
and number of times each is to be paged before the next paging number is added; additionally, the mail-
box owner can program these settings. To record a greeting, press PROGRAM ½ and the mailbox
number; then press # to confirm, and follow the prompts. The default password is the mailbox number.
Cascade mailbox options
The user can program up to three paging numbers, of up to 24 digits each, to be paged whenever the
mailbox takes a new or urgent message. The system will page the first paging number (for the number of
times listed), then add the second paging number (for the number of times listed), then add the third
paging number and will continue to page all three pagers until the message has been retrieved.
1. 2. 3. 4. 5. 6.
MB 1st Number Attempts 2nd Number Attempts 3rd Number
520 9725553232 2 9725554254 3 9725555452
To program this, enter:
1. The mailbox number — Range: 520–529. [Then press 1 to enter number programming, and
proceed to Step 2.]
2. First pager number — The number to be dialed (without the CO line Group [9, 8 or 71–76]).
3. Attempts — How many times the system will page (up to 20) before adding the second
pager number. Range: 0–99. (0 turns off delivery.)
4. Second pager number — The number to be dialed (without the CO line Group [9, 8 or 71–76]).
5. Attempts — How many times the system will page (up to 20) before adding the third
pager number. Range: 0–99. (0 turns off delivery.)
6. Third pager number — The number to be dialed (without the CO line Group [9, 8 or 71–76]).
Use the V scroll key to enter special characters; use the W scroll key to backspace. Press # to confirm
the inserted character and continue. Press # # to complete the entry.
