daily use electrolux 23
Select and start a washing
programme
Select the washing programme and
delay start with the door slightly
opened. The start of the
programme or the countdown of
the delay start will occur only after
the closure of the door. Until then it
is possible to modify the settings.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
mode.
4. Press the programme selection
button until the number
corresponding to the required
programme appears in the digital
display (see ‘Washing
programmes’ chart).
Programme selection button
indicator light and programme
number are flashing.
5. If you want to set options please
refer to the ‘Washing programme’
chart to be sure that the options
are available with the selected
programme.
6. Close the dishwasher door, the
programme starts automatically.
Setting and starting the programme
with delay start
1. After having selected the washing
programme, press the delay start
button until the flashing number of
hours for the delay start will appear
in the digital display. The
commencement of the selected
washing programme can be
delayed from 1 to 19 hours.
2. Close the dishwasher door, the
countdown starts automatically.
3. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
4. Once the delay start has elapsed
the programme will start
automatically.
Cancelling the delay start in
progress
● To cancel a delay start in progress
you have to reset the dishwasher.
Open the door and press the
Cancel button until 2 horizontal
lines will appear in the digital
display.
● Cancelling a delay start involves
also the cancelling of the washing
programme set. In this case you
have to set the washing
programme again.
117990 92/3en 16-06-2007 9:38 Pagina 23
