Problem Possible cause Possible solution
The cap of the salt container
is loose.
Tighten the cap.
Whitish streaks and
stains or bluish lay-
ers on glasses and
dishes.
The released quantity of
rinse aid is too much.
Decrease the released quanti-
ty of rinse aid
.
The quantity of detergent
was too much.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Dry water drop
stains on glasses
and dishes.
The released quantity of
rinse aid was not sufficient .
Increase the released quantity
of rinse aid.
The quality of the detergent
can be the cause.
Try a different brand of deter-
gent.
The dishes are wet. • The programme had no
drying phase.
• The programme had a low
temperature drying phase.
For better drying results, keep
the door ajar for some mi-
nutes.
The dishes are wet
and matt.
The rinse aid dispenser is
empty.
Make sure that there is rinse
aid in the rinse aid dispenser.
The quality of the rinse aid
can be the cause.
Try a different brand of rinse
aid.
The quality of the combi de-
tergent tablets can be the
cause.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the combi
detergent tablets.
Activating the rinse aid
dispenser with the multitab
function activated
1.
Press the on/off button to activate the
appliance.
2. Press Option to open the menu option.
3.
Press one of the menu buttons and go
to SETTINGS .
4. Press OK /Start to open the submenu.
5.
Press one of the menu buttons and go
to RINSE AID .
6. Press OK /Start .
7.
Press one of the menu buttons to acti-
vate the rinse aid dispenser ( ON ).
8. Press OK /Start to confirm.
9.
Press Option to close the menu option.
TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 550
Electrical connection Refer to the rating plate.
Voltage 220-240 V
Frequency 50 Hz
82
www.electrolux.com
