Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘Set-
ting and starting a programme’.
2. Press and hold buttons (8) and (9) at
the same time until the programme in-
dicators above buttons (8), (9) and (10)
flash.
3. Press button (10).
• The programme indicators above
buttons (8) and (9) go off.
• The programme indicator above
button (10) continues to flash.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4.
Press button (10) again and again to
change the setting.
5.
Deactivate the appliance to confirm
the setting.
6.2 Filling the salt container
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
56
www.electrolux.com
