4. Select a washing programme. Refer to
'Washing programmes'.
– The related programme indicator light
comes on.
– All other programme indicator lights go
off.
– The display shows three bars.
5. Close the appliance door. The washing
programme starts automatically.
– The display shows one bar. This stays
on for all the washing programme du-
ration.
You can select the washing programme
also with the door closed. When you
press a programme button, you have
only 3 seconds to select a different
washing programme. After these 3 sec-
onds, the washing programme start au-
tomatically.
Select and start a washing programme
with delay start
1. Open the door and switch on the appli-
ance.
2. Select a washing programme.
3. Press the delay start button again and
again until the display shows the neces-
sary number of hours for the delay start.
4. Close the appliance door.
– The countdown starts automatically.
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door inter-
rupts the countdown. When you close
the door, the countdown continues from
the point of interruption.
You can select the delay start also with
the door closed. When you select a
washing programme, you have only 3
seconds to select the delay start. After
these 3 seconds, the washing pro-
gramme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme or
a delay start
If a washing programme or a delay start
has not started, you can change the se-
lection.
When a washing programme or a delay
start are in progress, it is not possible to
change the selection. It is necessary to
cancel the washing programme or the
delay start to make a new selection.
When you cancel the delay start, this au-
tomatically cancels the selected wash-
ing programme. You have to select the
washing programme again.
1. Press and hold the function buttons B
and C until:
– The display shows three bars.
– All the programme indicator lights
come on.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
At the end of the washing programme
• The appliance stops automatically.
•The display goes off.
• The end-of-programme indicator light is
on.
1. Switch off the appliance.
2. Open the appliance door.
3. For better drying results, keep the door
ajar for some minutes.
Remove the load
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
are easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
32 electrolux
