7.1 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non-applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate one
of the options.
When the programme is completed or is
cancelled the options are set to the default
values.
You can enter the option list from any
programme in the programme list.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
4. If you want to set another option,
repeat step 2 and 3.
5. To go back to the programme list,
press the Back.
The display shows the selected
programme.
7.2 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt
from the salt container. The salt refilling
message does not show in the display.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
You do not need to activate Multitab every
time you start a programme. Once you
have activated the option it will remain
active.
• ON : Multitab on.
• OFF : Multitab off.
When you activate the option Multitab the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dosage by setting the rinse aid
level at 0. In this case the drying results
may not be satisfactory.
7.3 TimeSaver
This option increases the pressure and the
temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
The option is not applicable to all the
available programmes.
When the option is applicable to the
programme, you can choose to activate or
deactivate the TimeSaver option.
If you have also set an option
that is in conflict with
TimeSaver, it will not be
possible to choose
TimeSaver.
Select a programme and press the OK
key.
If TimeSaver is applicable, the display
shows the conditions Fast and Normal
and the programme duration for each
condition:
• Fast: select this condition to
activate TimeSaver and press the
OK key to confirm.
• Normal: select this condition to
deactivate TimeSaver and press
the OK key to confirm.
Before you set TimeSaver with the
programme ECO you have to deactivate
the AutoOpen option.
7.4 Child lock
This option prevents children to play with
the keys on the control panel while a
programme is running or when the
appliance is activated and ready for use.
If you activate the option Child lock while
the programme ECO is running, the option
AutoOpen is automatically deactivated.
Press at the same time the down
navigation key and the OK key.
www.electrolux.com12
