SETTING THE TIME BEAM
COLOUR
Nine colours are available for this light
beam. You can change the colour or deac-
tivate it.
1.
Press the on/off button to activate the
appliance.
2.
Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
3. Press and hold touchpads (4) and (5) at
the same time until the indicators of
touchpads (3), (4), (5) and (6) flash.
4. Press touchpad (6).
• The indicators of touchpads (3), (4)
and (5) go off.
• The indicator of touchpad (6) contin-
ues to flash.
• The display shows a number and the
letter C. Each number is related to a
different colour (0C = Time Beam de-
activated).
5.
Press touchpad (6) again and again to
change the colour.
6.
Deactivate the appliance to confirm.
ENGLISH 71
